BROEN ASIA PACIFIC
Balancing Valves
BALLOREX® Balancing Valves
BALLOREX® FLOWMETER & ACCESSOR
BALLOREX® flowmeter Flowmeter
The flowmeter optimizes the BALLOREX® installation with a combination of several functions.

- Flow measuring.
- Temperature measuring.
- Efficient balancing.
- Fault finding in operating installations.

The BALLOREX® flowmeter is a simple but effective accessory which can be used after only five minutes of training.

Specification of BALLOREX® Flowmeter

- Measuring box made of ABS plastic.
- Measuring probe of chromium 
  plated brass with abuilt-in 
  temperature sensor.
- Seperate temperature sensor.

The flowmeter is delivered in a case for carrying and with a detailed manual.
 
Insulation cover for BALLOREX® valve Insulation cover DN 10-50
To be used to minimise the thermal loss from the valve to the environments.
Min. temperature -20ºC
Max. temperature 125ºC
Thermal conductivity 0,023 W/mºC

The insulation cap consists of 2 cups which are placed around the valve. The cups are assembled with an Allen-key to be mounted into the small hole next to the handle

DN Ordering no.
10/15 3315050-000005
20 3415050-000005
25 3515050-000005
32 3615050-000005
40 3715050-000005
50 3815050-000005

          Extended spindle for BALLOREX® valve

Extended spindle DN 10-50
When the insulation cover is used for DN 10 to DN 50, an extended spindle can be fitted to enable valve to be used for shut off operation without removing the insulation cover.
DN Ordering no.
10-25 3315029-000005
32-50 3615029-000005

 

Protection cover for BALLOREX® valve


Protection cover DN 10-50
The protection cover is used as sealing of the shutting of function.
DN Ordering no.
10-25 3315027-000005
32-50 3615027-000005
Additional accessories
- Allen Key*
- Handle, short
- Handle, long
- Needle		 - Needle tool
- Pins (DN 65-150)*
- Pointed screw (DN
  65-150)*
- Installation instructions*

* Delivered with the valve as standard