|
Broen BOSS water fittings are designed for laboratory use. The operation and the configuration of the fittings are highly adapted to the requirements of a modern laboratory.
The fittings are equipped with detachable hose nozzles mounted with rotating nuts (no twisting of hoses) as well as built-in BALLOFIX® shut-off valves where applicable.
Every fitting is leak tested before leaving our factory.
Allowable pressure test after installation:
1.0 x max. working pressure without function of the valve.
|
|
 BOSS
water fittings with handy grips are delivered with ceramic head
works. Water fittings with ceramics have long life and provide
quick and precise adjustment.
Opening/closing function = 1 x 180º turn.
Hot water = maximum 90ºC.
Spare parts see section 13.
|
Materials with medium contact:
|
Metals: Brass
Sealing: EPDM
Plastics: POM
Lubricant: Silicone based
Ceramics: Al-oxyd 96%
|
|
Flow chart
|
|
 No.
xx xx.86x
BOSS water fittings are available with fine-regulating head works, based on a rising spindle.
Water fittings with needle head works can be set to give a very exact and
precise flow.
Opening/closing function = 3 x 360º turn.
Hot water = maximum 90ºC.
Spare parts see section 13.
|
Materials with medium contact:
|
Metals: Brass
Sealing: EPDM
Plastics: PVDF
Lubricant: Silicone based
|
|
Flow chart
|
|
 No.
xx xx.72x
BOSS water fittings based on ceramic discs are available with wrist action lever.
Opening/closing function:
90º turn
Hot water = maximum 90ºC.
Spare parts see section 13.
|
Materials with medium contact:
|
Metals: Brass
Sealing: EPDM
Plastics: POM
Lubricant: Silicone based
Ceramics: Al-oxyd 96% |
|
Flow chart
|
