|
|
Illustration No. 1:
At our manufacturing facility the spouts are prepared for limited swivel action. Fix the union nut by hand. Set the spout in the desired left/right position. While holding the spout in the right hand position, re-tighten the union nut by means of BROEN key No. 19 501.009.
Illustration No. 2:
If fixed spout are desired, turn the plastic ring "A" 180° above the ball. While holding the spout in the desired position, fix the union nut to the valve.
Illustration No.3:
If full swivel action is desired, remove the ball "B". Fix the union nut. |
|
 All
water fittings are delivered with a detachable nozzle with a loose
union nut which leads to quick and unproblematic de-mounting and
mounting of same even when a hose has been fixed to the nozzle.
Please note! If a nozzle is not being used with a hose, an aerator ought to be fixed to the spout.
No. 19 025.009
Aerator with 1/2" connection.
No. 19 229.009
Nozzle with 1/2" union nut connection. |
|
Materials with medium contact:
|
No. 19 025.009
Metals: Brass and nickel
Sealing: EPDM
Plastics: POM |
No. 19 229.009
Metals: Brass
Sealing: EPDM |
|
|
The fittings are surface treated with BROEN POLYCOAT powder coat, which is highly resistant to most chemicals, UV fading and heat.
|
|
