BOSS CLEANLINE 6.0 fittings can be used for gases up to 6.0 (99,9999% clean gas).
The fittings are used when the requirements for gas purity are crucial: Laboratories in general (as point-of-use valves), for gas chromatography, spectrometry, for non-corrosive gases e.g. Ar, He, N2, H2, CH4.
BOSS CLEANLINE 6.0 special features:
- Ultrasonically cleaned and assembled components
- Sealings are made of metal and PVDF
- Leakrate < 10-7 mbar l/s.
- Packaged in sealed bags to maintain cleanliness
- Twin ferrule compression fittings secure clean connection on outlet.
|
Every fitting is pressure tested at max. test pressure (16 bar / 235 psi) before leaving our factory.
Every fitting is helium leak tested before leaving the factory.
Leak rate better than 10-7 mbar l/s.
Spare parts see section 13.
|
|
 BOSS CLEANLINE 6.0 diaphragm valve for closing of media flow. The valve is with metallic sealiing and metal diaphragm.
Opening / closing
function: 270º turn.
|
Materials with medium contact:
|
Metals: Brass and stainless steel
Sealing: PVDF |
|
Capacity graph
|
|
 BOSS CLEANLINE 6.0 pressure regulation valve for regulation of media pressure. With built-in pressure gauge.
The pressure regulator is available as 1 bar, 3 bar and 8 bar versions.
|
Materials with medium contact:
|
Metals: Brass and stainless steel
Sealing: NBR, EPDM |
|
Flow chart
|
|
 BOSS CLEANLINE 6.0 needle valve for fine
regulating of media flow. The valve has a bellow in stainless steel and metallic sealing.
Opening / closing function: 3 x 360º turn.
|
Materials with medium contact:
|
Metals: Brass
Sealing: PVDF |
|
Capacity graph
|
|
