BOSS CLEANLINE 5.0 fittings can be used for gases up to 5.0 (99,999% clean gas).
The fittings are used when the requirements for gas purity are high: Laboratories in general, chromatography, Ar, He, N2, H2, CH4 and working gases for spectrometry.
BOSS CLEANLINE 5.0 special features:
- Ultrasonically cleaned components
- Sealings are made of PVDF and FPM (Viton)
- Packaged in sealed bags to maintain cleanliness
- Twin ferrule compression fittings secure clean connection on outlet.
|
All fittings are leak tested before leaving the factory. Leak rate better than 10-3 mbarl/s.
1 out of 100 valves is helium leak tested. Leak rate better than 5x10-5 mbar l/s.
Maximum test pressure 16 bar / 235 psi.
|
|
 BOSS
CLEANLINE 5.0 Stop valve for shut-off of media flow.
Opening / closing function: 1.5 x 360º turn.
|
Materials with medium contact:
|
Metals: Brass
Sealing: Viton, PVDF
Lubricant: Approved for oxygen |
|
Capacity graph
|
|
 BOSS
CLEANLINE 5.0 pressure regulation valve for regulation of media
pressure. With built-in pressure gauge.
The pressure regulator is available as 3 bar and 8 bar versions.
|
Materials with medium contact:
|
Metals: Brass and stainless steel
Sealing: EPDM, PA |
|
Flow chart
|
|
 BOSS
CLEANLINE 5.0 flow regulation valve. For regulation of media
flow.
Opening / closing function: 3 x 360º turn..
|
Materials with medium contact:
|
Metals: Brass
Sealing: Viton, PVDF
Lubricant: Approved for oxygen |
|
Capacity graph
|
|
